Send Email
Send SMS
Saif Trading Corporation

CRC Products

Leading Wholesale Trader of crc 5.56 multipurpose, crc 2-26 multi-purpose precision lubricant and crc galva brite from Chennai.

CRC 5.56 Multipurpose


CRC 5.56 Multipurpose
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 200 / OnwardsGet Latest Price

Product Details:
AppearanceLight amber, clear liquid
Flash Point78 deg C (closed cup)
Available PackagingAerosol-440 g/550 ml, 12 x 200 ml, 24 x 200 ml, 12 x 400 ml, 24 x 400 ml, Bulk 5 L + sprayer, 4 x 5
Specific Gravity0,82 @ 20 deg C
Freezing PointLess than -50 deg C
Surface Tension22 mN/m @ 20 deg C
Water Displacement1 to 2 mocrometer (IP1 78/61, method B) Ultimate film thickness
Maximum Expected Coverage100 m2 / l (@ 20 deg C, after a 24 h spread)
Weight400 g

  • Multi-purpose service spray.
  • A multi-purpose penetrating and lubricating product that breaks through rust and corrosion, displaces water and cleans away scale and dirt.
  • CRC 5.56 Multipurpose is based on a paraffinic oil and a multiple organic inhibitor system that prevents rust and corrosion by forming a continuous protection barrier against water and oxygen.

  • Penetrates quickly, even into the finest pores and cracks of the surface.
  • Lubricates and restores smooth action.
  • Displaces moisture out of all electrical and ignition systems and makes it possible to start wet engines.
  • Loosens rusted parts and makes them work again.
  • Stops annoying squeaks.
  • Leaves a thin film that protects metals from corrosion induced by humidity and other corrosive atmospheres.
  • Easy repair by eliminating the need for disassembly.
  • Safe for all metals and alloys.
  • Safe on most painted surfaces, coatings, plastics and rubbers (if in doubt, test prior to use).
  • Aerosols are equipped with the 360° (upside-down) spray valve and extension tube for added convenience.
  • Aerosols are pressurized with non-flammable CO2 propellant, giving an active product content of over 95% (i.e. over 30% more than typical hydrocarbon propelled products).
  • Specifications - NSN 9150-00-529-7222

  • A modern, versatile helper for hundreds of repair jobs in all working environments.
  • Electrical parts: Plugs, switches, coils, leads
  • Cars: Ignition system, distributors, battery terminals, cables, starter motors, aerials, nuts and bolts, chrome, seat slides, door latches, spark plugs
  • Home: Door locks and hinges, sliding doors and windows, drills, locks, hinges, catches, DIY tools, scissors, zippers, buggies, toys
  • Leisure: Fishing gear, bicycles, garden tools, roller blades, roller skates, ski fittings, marine, golf buggies
  • Hundreds of other uses in: Workshops, garages, building sites, factories, offices, gardens, homes, do-it-yourself

  • Apply generously and allow penetrating. Full penetration may take a few minutes or more.
  • To start wet engines: spray into distributor, over coil connectors and wiring.
  • For hard to reach areas, use extension tube.
  • If necessary, to be removed by CRC Brakleen or CRC Quickleen.
  • A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

Film properties (after evaporation of solvent):
  • Specific gravity @ 20°C: 0,88
  • Dynamic viscosity @ 40°C: 26 mPa.s
  • Load wear index: 930 N (mean Hertz load), (FTMS 791-6503.2)
Yes! I am interested

View PDF

CRC 2-26 Multi-Purpose Precision Lubricant


CRC 2-26 Multi-Purpose Precision Lubricant
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 220 / OnwardsGet Latest Price

Product Details:
AppearanceLight amber, clear
Freezing PointLess than -50 deg C
Flash Point75 deg C (closed cup)
Weight5 oz.(142 g)
Specific Gravity0.83 (@ 20 deg C)
Dynamic Viscosity4 mPa.s (@ 20 deg C)
Ultimate Film Thickness2.10-6m (2 micrometer) (@ 20 deg C, after a 24 hr spread)
Maximum Expected Coverage60 to 100 m2 /l (@ 20 deg C, after a 24 hr spread)
Solvent Dissipation2-4 hrs. (@ 20 deg C, thin film)
Heat Resistance120 deg C (150 deg C short time)
Available PackagingAerosol-12 x 200 ml - 12 x 400 ml, Bulk-4 x 5 l, 20 l - 200 l

CRC 2-26 Multi-Purpose Precision Lubricant is a multipurpose lubricant preventing electrical and electronic malfunction caused by water penetration, humidity, condensation or corrosion. The stable, low surface tension, high capillary action formula provides great penetrating and spreading power.

  • Cleans, lubricates, protects, penetrates, and loosens corrosion.
  • Prevents corrosion by displacing moisture.
  • Restores resistance values by reducing current leakage.
  • Provides precision lubrication by its thin, high dielectric strength, lubricating film.
  • Helps restore water-damaged electrical equipment.
  • Frees rusted or seized parts by penetrating into the finest pores and cracks.
  • Can be used on all metals and alloys.
  • Will not harm most of modern plastics, painted surfaces, coatings and rubbers. Test prior to use.
  • Convenient 360° (upside-down) spray valve for aerosols.
  • Non-flammable CO2 propellant, giving an active product content of 97%.
  • Specifications: * NSN 6850-00-874-5847.

  • Helps to protect, lubricate and restore:
  • Electrical connectors
  • Relays
  • Circuit breakers
  • Transformers
  • Switch gears
  • Motors
  • Generators
  • Controls
  • Instruments
  • Communication assemblies
  • Electronics
  • Alarm systems
  • Starters

  • Do not use on fine electronics.
  • Spray light even coat to protect surfaces and to seal out moisture.
  • Apply liberally to loosen rusted/seized parts; full penetration may require several hours.
  • To displace water, spray wet surfaces until run-off is clear and moisture free. When possible, dip water damaged equipment in CRC 2-26; agitate while submerged; remove and allow draining. A detailed “CRC water damage restoration” procedure is available upon request.
  • To be removed by CRC Lectra Clean II, hydrocarbon solvents or alkaline degreasing before surface treatment.
  • For application of CRC 2-26 in dipping baths, customers should take care to stir from time to time (to distribute small amounts of deposits) and to prevent excessive evaporation of solvent. When stable emulsions have been formed, the bath should be emptied and cleaned, and the product replaced.
  • Do not use on energized equipment; allow solvent to evaporate before energising. This evaporation may take up to 4 hours, depending on surface condition and environment. Use only in well ventilated area.

  • Water displacement (IP 178/61, method B): Pass

Film properties (after evaporation of solvent):

  • Specific gravity (@ 20°C): 0.89
  • Falex true load failure (ASTM D 3233, Proc.A): 8900N
  • Salt spray resistance (*): 55 hrs.
Yes! I am interested

View PDF

CRC Galva Brite


CRC Galva Brite
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 450 / OnwardsGet Latest Price

Product Details:
CoverageAerosol-approx. 1,6 m2/can (400 ml), Bulk-approx. 12 m2/k (30 micrometer, dry)
Pack SizeAerosol-12 x 400 ml, Bulk-750 ml
AppearanceBright alu finish
Resin TypeModified alkyd
Pigment TypeZinc, Leafing aluminium
Specific GravityAerosol-1,06, Bulk-1,15 (@ 20 deg C)
Flash PointAerosol-4 deg C, Bulk-27 deg C (solvents)
Drying TimesTo touch-10-15 min, To handle-1 h, Complete curing-24 h
Recommended Film Thickness30-40 micrometer
Thinner or cleanerWwhite spirit, Acetates

Protective zinc-aluminium coating. A single component, zinc-aluminium coating combining corrosion protection properties with the lustre look of aluminium. Galva Brite is a combination of zinc and aluminium powders, resins and additives, formulated to form a flexible protective film with a bright, glossy appearance.

  • Excellent touch-up for galvanized surfaces.
  • Provides excellent corrosion and rust resistance to ferrous metals.
  • The galvanic properties ensure cathodic protection (the coating becomes the anode).
  • Unique combination of flexibility and hardness.
  • Resists rusting, peeling and fading.
  • Adheres well to metal surfaces.
  • Combines the galvanised look with the convenience of an aerosol application.
  • Totally lead and chromate free.
  • No chlorinated and low-aromatic solvents.
  • Aerosols use dimethylether (DME) propellant for controlled spray and film properties.

  • Fences and gates
  • Home, garden and farm equipment
  • Construction equipment
  • Structural steel
  • Guard rails
  • Welding seams
  • Pipes and fittings
  • Coastal and shipborne installations
  • Repair of LPG storage tanks

  • Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.
  • Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush.
  • Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15-20 minutes.
  • When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes. If clogging occurs, remove button and clean orifice with fine wire.
  • Do not use on energised equipment. Use in well ventilated area.

Dry film properties (35 µm on degreased metal):
  • Salt spray (ASTM B 117): 100 h (**) (35 µm film thickness)
  • Adhesion on steel (NFT 30038): 0
  • Flexibility (6 mm mandrel, visual): pass
  • Heat resistance (4 h @ 200°C): slight yellowing
  • Hardness Persoz (after 72 h): 80 s.
  • Solvent resistance: TB
Yes! I am interested

View PDF

Explore More Products

Contact via E-mail
Contact via SMS
Saif Trading Corporation
Huzefa Raja (Proporiter)
No. 52, Sembudoss Street , Parrys,
Chennai - 600001, Tamil Nadu, India
Call Us: 
Call Response Rate: 66%
Share Us :

Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us

© Saif Trading Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Saif Trading Corporation